做好对工程铜门的维护和保养，可以提升铜门的使用性能，在选择门的材质上，不同的人有不同的观点，目前很多人都开始使用铜门，但是如何保养才能让铜门的使用期限变的更长，下面 山东铜门厂家就给大家讲一下工程铜门的保养方法，希望以下内容对大家能有帮助。

Good maintenance and upkeep of engineering copper doors can improve their performance. Different people have different opinions on the material selection of doors. Currently, many people are starting to use copper doors, but how to maintain them can make their service life longer. Below, Shandong copper door manufacturers will explain the maintenance methods of engineering copper doors, hoping that the following content can be helpful to everyone.

铜门安装好后，如果要对周围墙壁进行粉刷，一定要先将工程铜门用东西遮掩好。避免涂料沾到门上，出现表面材料剥落、褪色，破坏产品美观。

After the installation of the copper door, if you want to paint the surrounding walls, be sure to cover the engineering copper door with something first. Avoid paint sticking to the door, causing surface material to peel off, fade, and damage the appearance of the product.

工程铜门在使用的时候，不能将太重的东西挂在门扇上，可不要使用尖锐锋利的东西碰、划门体。开门和关门的时候，注意避免用力太大或者打开角度太大而损坏铜门。

When using engineering copper doors, heavy objects should not be hung on the door leaf, and sharp objects should not be used to touch or scratch the door body. When opening and closing the door, be careful not to damage the copper door due to excessive force or opening angle.

因为铜门的本身材质的原因，它的保养很重要，如果它表面的油漆脱落的话，里面的电解板就会暴露出来，而电解板一旦与空气中的氧气接触就会发生氧化反应，导致电解板锈化，影响门的美观。保养铜门很重要的一点就是保持外面油漆的完整性，防止磕碰和撞击。

Due to the material of the copper door itself, its maintenance is very important. If the paint on its surface falls off, the electrolytic board inside will be exposed. Once the electrolytic board comes into contact with oxygen in the air, it will undergo oxidation reaction, leading to rusting of the electrolytic board and affecting the appearance of the door. It is important to maintain the integrity of the paint on the outside of the copper door to prevent collisions and impacts.

在平常的工程铜门保养上，可以用干毛巾对它进行清洁。但不能使用含有破坏油漆保护层的化学成分的洗涤剂来清洁，在开启和关闭铜门的时候需要缓慢，可以在很大程度上避免铜门与其他东西的碰撞而导致工程铜门的保护层被破坏。

In normal engineering copper door maintenance, it can be cleaned with a dry towel. But detergents containing chemicals that damage the paint protective layer cannot be used for cleaning. When opening and closing the copper door, it needs to be done slowly, which can greatly avoid the collision between the copper door and other things, leading to the damage of the protective layer of the engineering copper door.

在平时的保养上也需要防止一些氧化物质对其表面形成侵害而导致铜门的腐蚀。在清洁铜门上沾着的污迹时，可以先吹气打湿以后，再拿柔软的布擦拭，避免使用硬布，防止工程铜门表面被划伤。要是门上的污渍非常严重，可以适量使用中性的洗涤剂或者牙膏等清洗剂，污渍去除之后要及时擦干净。使用过程中，如果出现大面积损毁，需要找规范的铜门厂家维修。

In daily maintenance, it is also necessary to prevent some oxidizing substances from damaging the surface and causing corrosion of the copper door. When cleaning the stains on the copper door, you can first blow air to wet it, and then use a soft cloth to wipe it, avoiding the use of hard cloth to prevent scratches on the surface of the engineering copper door. If the stain on the door is very serious, you can use a moderate amount of neutral detergent or toothpaste and other cleaning agents. After the stain is removed, it should be wiped clean in a timely manner. If there is extensive damage during use, it is necessary to find a standardized copper door manufacturer for repair.

铜门的性能特点非常多，外观特色是比较明显的特色，也是因为它的气质浑厚，抗菌抗氧化，不易受损将精湛的铜工艺与现代科技结合，可令有限的空间挥发无限的气度。工程铜门使用的范围也越来越广，做好日常维护保养可以提升使用性能，您有需求就来咨询我们 //www.doveish.com吧！

There are many performance characteristics of copper doors, and their appearance characteristics are quite obvious. It is also because of its rich temperament, antibacterial and antioxidant properties, and not easily damaged. By combining exquisite copper craftsmanship with modern technology, it can evaporate infinite vitality in limited spaces. The scope of use of engineering copper doors is also becoming wider and wider. Proper daily maintenance can improve their performance. If you have any needs, please consult us //www.doveish.com Come on!