经过着色的铜门，由于具有感，且其使用、观赏价值比较高，因而受到人们的普遍欢迎。着色铜除有丽的外观，作为装饰外，因此，着色开发了表面处理又一新领域。接下来 山东铜门小编给大家介绍一下铜门的处理工艺及注意事项。

Colored copper doors are widely welcomed by people because of their sense, high use and ornamental value. Colored copper has a beautiful appearance as decoration. Therefore, coloring has developed a new field of surface treatment. Next, Shandong Copper Door Weaving Group will introduce the processing technology and precautions of copper doors.

处理工艺：

Treatment process:

1、除油除锈除氧化皮水洗酸洗抛光水洗中和水洗着色处理水洗干燥及其它后处理

1. Degreasing, derusting, descaling, water washing, pickling, polishing, water washing, neutralization, water washing, coloring, water washing, drying and other post-treatment

2、酸洗抛光使用铜材酸洗抛光液进行处理。目的是使黄铜表面具有光泽。

2. Pickling and polishing shall be conducted with copper pickling and polishing solution. The purpose is to make the brass surface shiny.

3、本品为工作液，将工件浸泡于本品中，2分钟左右黄铜表面即变成黑青色，根据实验结果。浸泡时间为2-25分钟时，表面变色，可获得较好的防锈性能。工件可重复浸泡，增加变色层厚度，可获得满意。

3. This product is a working solution. Soak the workpiece in this product, and the brass surface will turn black and blue after about 2 minutes. According to the experimental results. When the immersion time is 2-25 minutes, the surface will change color, and good rust resistance can be obtained. The workpiece can be soaked repeatedly to increase the thickness of the discolored layer, which can be satisfied.

4、如想古铜色，经上述步骤处理后，可用砂纸摩擦，可理想的。

4. If you want bronze color, after the above steps, you can rub it with sandpaper, which is ideal.

注意事项

matters needing attention

1、勿入眼口，勿触皮肤。如勿触清水冲干净。施工现场尽可能通风良好，远离光热，单存放

1. Do not enter the eyes or touch the skin. Do not touch clean water. The construction site shall be well ventilated as far as possible, away from light and heat, and stored separately

2、本品有挥发的可能，建议在通风厨或通风良好环境下生产操作

2. This product may volatilize. It is recommended to operate in a ventilated kitchen or a well ventilated environment

3、本品有腐蚀性，操作时戴好防护用品;勿食勿饮;孩童勿触。

3. This product is corrosive. Wear protective equipment during operation; Do not eat or drink; Keep away from children.

4、着古铜色，用砂纸摩擦后防氧化有所下降。

4. It is bronze in color, and the oxidation resistance decreases after rubbing with sandpaper.

以上是山东铜门厂家给大家总结的关于山东铜门的着色处理工艺及注意事项?如果大家还有什么不了解的问题请登录网站 //www.doveish.com进行详细的了解！

The above is a summary of Shandong copper door manufacturers about Shandong copper door coloring process and precautions? If you have any questions that you don't understand, please visit the website //www.doveish.com Learn more!