为适应更多的应用环境，铜门生产厂家会制作生产出不同的铜门产品供您选择使用。那么您知道铜门制作过程中必出现的制作工艺是什么吗？实际上是钻孔，下面就针对这一工艺来讲解下内容吧。

In order to adapt to more application environments, copper door manufacturers will produce different copper door products for your choice. Then do you know what the manufacturing process must appear in the manufacturing process of copper doors? It's actually drilling. Let's explain the content of this process.

作为铜门制作过程中必然出现的制作工艺，钻孔过程中必定会在铜门上留下钻污，由于钻污的存在并不影响铜门的正常使用，同时对铜门美观性的影响也相对较小，所以往往得不到使用者的重视，从而导致一系列的问题。铜作为一种其稳定的金属，铜门的制作过程中往往需要使用转速每分钟16到18万次的钻嘴进行。

As an inevitable manufacturing process in the manufacturing process of copper doors, drilling dirt is bound to be left on the copper doors during the drilling process. Because the existence of drilling dirt does not affect the normal use of copper doors, and the impact on the aesthetics of copper doors is relatively small, it often does not get the attention of users, resulting in a series of problems. As a stable metal, copper often needs to use a drill nozzle with a speed of 160000 to 180000 times per minute in the manufacturing process of copper doors.

钻孔的孔壁往往以环氧玻璃基材作为材料，而这种材料并不是一种良好好导体。钻孔过程中的高温往往会在表面留下钻污，由于环氧玻璃基材的存在，这种材料的不稳定性有很大可能会影响铜门制作过程中的结构完整性，尤其对于复合结构的铜门，可能影响孔壁之间的影响力，造成粘合处出现脱落，开裂等非正常现象。

The hole wall of drilling is often made of epoxy glass substrate, which is not a good conductor. The high temperature in the drilling process often leaves drilling dirt on the surface. Due to the existence of epoxy glass substrate, the instability of this material may greatly affect the structural integrity of the copper door in the manufacturing process, especially for the copper door with composite structure, which may affect the influence force between the hole walls, causing abnormal phenomena such as falling off and cracking at the bonding point.

要去掉铜门上的钻污，需要用的的东西一般为碱性的化学溶液，常见的比如高锰酸钾。高锰酸钾能够把钻污的树脂外表腐蚀成蜂窝外形的大小空隙，这样做既能使得附着在表面的树脂和化学铜产生更大的结合力，又能使得钻污有效脱落，这个方法也成为了合适也是成本和风险小的方法。

In order to remove the drilling dirt on the copper door, it is generally necessary to use alkaline chemical solutions, such as potassium permanganate. Potassium permanganate can corrode the surface of the contaminated resin into voids of honeycomb shape, which can not only produce greater bonding force between the resin attached to the surface and chemical copper, but also make the contaminated soil fall off effectively. This method has also become a suitable method with low cost and risk.

同时，因为高锰酸钾溶液是一种常用溶液，所以在日常生活中较为容易获得，也使得这个方法更加便利。在日常生活当中，由于没有及时清理 济南铜门的钻污导致铜门发生变色、生锈甚至开裂的现象并不是鲜有发生，铜门的日常护理能够通过简单的手动操作使铜门的外表历久弥新的同时提高铜门的使用寿命。

At the same time, because potassium permanganate solution is a common solution, it is easier to obtain in daily life, which also makes this method more convenient. In daily life, it is not uncommon for the copper door in Jinan to change color, rust or even crack due to the failure to clean up the drilling dirt of the copper door in time. The daily care of the copper door can make the appearance of the copper door timeless and improve the service life of the copper door through simple manual operation.

以上就是今天为大家介绍的关于问题以及注意事项的全部内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站 //www.doveish.com，我们的工作人员会及时与您取得联系。

The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website //www.doveish.com , our staff will contact you in time.