铜门是美观与实用的完美结合，是一款非常理想的门产品。购买铜门不仅要看它的价格，质量和性能同样重要，那么在铜门的质量和性能上应该注意什么？接下来小编就为大家介绍一下铜门的选购——品质和性能不容忽视。

The copper door is a perfect combination of beauty and practicality. It is a very ideal door product. Buying a copper door depends not only on its price, but also on its quality and performance. What should be paid attention to in terms of the quality and performance of the copper door? Next, Xiaobian will introduce to you the purchase of copper doors - quality and performance can not be ignored.

仔细检查门锁，确保其性能和结构

Carefully check the door lock to ensure its performance and structure

防盗性能好的铜门选用防钻锁。当钻头钻入锁孔时，锁具与钻头同步转动，不会损坏锁具。铜门的锁需要三向锁定结构，以确保安全，门不会轻易打开。

Anti drilling lock shall be selected for copper door with good anti-theft performance. When the drill bit is drilled into the lock hole, the lock and the drill bit rotate synchronously without damaging the lock. The lock of the copper door needs a three-way locking structure to ensure safety, and the door will not be opened easily.

锁头数量和插入杆数量

Number of lock heads and insert rods

铜门建议是选择两把锁，这样可以分别控制插杆的门。即使有破坏者，破坏也会更加费力和耗时。一般情况下，一把锁能控制的柱塞数量为三四个，其防盗性能较差，但一旦锁具损坏，柱塞的功能也会丧失。

It is recommended to select two locks for the copper door, so that the door with the inserting rod can be controlled respectively. Even if there are saboteurs, destruction will be more laborious and time-consuming. Generally, a lock can control threeorfour plungers, which has poor anti-theft performance. However, once the lock is damaged, the function of the plunger will also be lost.

铜门的质量由锁具周围加强板的厚度和面积来确认

The quality of the copper door is confirmed by the thickness and area of the reinforcing plate around the lock

从结构设计来看，铜门可以分为封闭式和围栏式两种，但无论你选择什么，盗窃和损坏的主要部分是锁。因此，应选择厚度大于2毫米的冷钢板作为锁护板，护板的高度不应小于500毫米。

From the perspective of structural design, copper doors can be divided into closed type and fence type, but no matter what you choose, the main part of theft and damage is the lock. Therefore, the cold steel plate with thickness greater than 2mm shall be selected as the lock guard plate, and the height of the guard plate shall not be less than 500mm.

检查锁具的工艺质量

Check the process quality of the lock

济南铜门的质量与制造工艺密切相关。选购时应仔细观察表面是否有焊接缺陷，如是否有开焊、未焊、漏焊或夹渣等现象。同时，还要检查门框与门扇的配合是否紧密，能否灵活开启，间隙是否均匀等。此外，电镀漆面应保持均匀、牢固、光滑。

The quality of Jinan copper door is closely related to its manufacturing process. When purchasing, carefully observe whether there are welding defects on the surface, such as open welding, no welding, missing welding or slag inclusion. At the same time, it is also necessary to check whether the door frame and door leaf are closely matched, whether they can be opened flexibly, and whether the gap is uniform. In addition, the electroplated paint surface shall be uniform, firm and smooth.

如果你想买一个品质有保证的铜门，又想花便宜的价格，这是不可能的事情！铜门是很特殊的一个行业，是高工资成本行业，铜门产品不存在性价比，价格越低的产品意味着问题越大。市场上大多数价格普通便宜的铜门，其质量可想而知。

If you want to buy a copper door with guaranteed quality and want to spend a cheap price, it is impossible! Tongmen is a special industry with high wage cost. There is no cost performance of Tongmen products. The lower the price, the greater the problem. The quality of most common and cheap copper doors in the market can be imagined.

铜门的表面铜板在灯光下远距离查看凹凸不平的，是铜板厚度有严重偷料的铜门，表面有胶痕，门扇手感比较轻，五金配件比较普通，锁芯防盗级别比较低的，细节比较粗糙的。这些都是普通品质铜门表面直观可以感觉得到的。

The copper plate on the surface of the copper door is uneven when viewed from a distance under the light. It is a copper door with a serious steal of copper plate thickness. There are glue marks on the surface. The door leaf feels light, the hardware fittings are common, the anti-theft level of the lock cylinder is relatively low, and the details are rough. These are common quality copper doors that can be directly felt on the surface.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站 //www.doveish.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website //www.doveish.com And consult our staff, will serve you wholeheartedly.