Now we Shandong copper door manufacturers to take you to understand how to correctly measure the size of Shandong copper door.

铜门在购买后，使用前还需要安装后，才能正常使用，而安装技术的好坏，会直接影响没呢的质量与美观。要想把门安装的好，测量时尺寸时就必须要找准方法。

After the purchase of copper doors, they need to be installed before they can be used normally, and the quality of installation technology will directly affect the quality and beauty of the products. If you want to install the door well, you must find the correct method when measuring the size.

如何正确测量门洞大小

How to measure the size of door opening correctly

入户铜门门单面套铜门门洞测量：测量高度;再测量宽度，由于进户铜门门的右侧没有铜门门垛，会导致安装的时候整个木铜门门的线条无法安装，因此就需要在此安装一个假铜门门垛，铜门门垛厚度为4公分，宽度为墙体的宽度。然后根据铜门门洞的进空减去铜门门垛的厚度，得出的数据就是铜门门的宽度;再测量墙体的厚度。

Door opening measurement: first measure the height and then measure the width. Because there is no copper door stack on the right side of the door, the whole line of the wooden door can not be installed. Therefore, a false copper door stack is needed here. The thickness of the copper door stack is 4cm and the width is the width of the wall. Then according to the copper door hole into the empty minus the thickness of the copper door stack, the data is the width of the copper door; then measure the thickness of the wall.

铜门门的测量方法

Measuring method of copper door

铜门门面宽=铜门门扇宽+铜门门套线宽度

Width of copper door face = width of copper door leaf + width of copper door pocket line

铜门门洞宽=铜门门扇宽+铜门门扇预留缝隙+铜门门框主板厚度+铜门门框固板厚度+铜门门框调整余量

Width of copper door opening = width of copper door leaf + reserved gap of copper door leaf + main board thickness of copper door frame + fixed plate thickness of copper door frame + adjustment allowance of copper door frame

铜门门洞的测量

Measurement of copper door opening

铜门门洞的宽度：水平测量铜门门洞左右的距离，选取五个以上的测量点进行测量，其中更小值(减门框调整余量)为铜门门框外延宽度尺寸

Width of copper door opening: horizontally measure the left and right distance of copper door opening, select more than five measuring points for measurement, and the minimum value (minus the adjustment allowance of door frame) is the extension width of copper door frame

铜门门洞的高度：垂直测量铜门门洞上下的距离，选取三个以上的测量点进行测量，其中小值(见铜门门框调整余量)为铜门门框外延高度尺寸

Height of copper door opening: vertically measure the distance between the top and bottom of the copper door opening, select more than three measuring points for measurement, and the small value (see the adjustment allowance of the copper door frame) is the extension height of the copper door frame