分类导航
新闻
联系我们
beplay电话多少
联系电话：15066683078
联系地址：济南市天桥区历山北路黄台装饰不锈钢市场北区28号
济南铜门从制作到装置工艺流程
来源：
//www.doveish.com日期：2018-10-20 发布人：admin浏览次数：
0
济南铜门从制作到装置工艺流程
Ji'nan copper door from production to installation process flow
一、排料、剪折板，依据订单核算铜板、线条、铜花、角铁、方管、五金配件、外协件、包装资料等。
1. Material layout and folding board cutting, according to the order accounting copper plate, line, copper flower, angle iron, square pipe, hardware accessories, outsourcing parts, packaging information, etc.
1.门框、门套、门头、门扇铜板剪切->冲孔、打缺口->折弯
1. door frame, doorcase, door head, door leaf copper plate shear > punch, Notch - > bend.
2.门扇内骨架铜板剪切->冲孔、打缺口->折弯
2. the inner frame of the door leaf is cut by copper plate > punching, notching > bending.
3.门框、门套、门头内骨架铁管下料
3. door frame, door sleeve, and inner frame of the door head.
二、内部钢结构焊接，门扇骨架拼装焊接->填门芯资料->加焊锁、铰链等加强板->打磨处理，门框、门套、门头铁管骨架拼装焊接->打磨处理
2. Internal steel structure welding, door frame assembling welding - > filling core data - > welding locks, hinges and other reinforcement plates - > grinding treatment, door frame, door sleeve, door head iron tube skeleton assembling welding - > grinding treatment
三、铜板氧化上色及防氧化处理，铜板、料型、花件及线条等做打磨处理->上色->喷漆->进烤箱
3. Oxidation and anti-oxidation treatment of copper plate, polishing treatment of copper plate, material type, flowers and lines - > coloring - > spraying - > into the oven
四、门扇拼装
Four. Door leaf assembly
1.门扇骨架订木板->四边铜边料拼装->线条及其它铜板装修拼装->花件拼装
1. door frame, wooden plank > quadrangle copper side material assembly > lines and other copper decoration assembly > flower parts assembly
2.门套、门头骨架订木板->门套、门头、铜板、线条拼装、花件拼装
2. door frame, door frame, wooden plank > door, door, copper, line assembly, flower piece assembly.
五、五金件装置
Five, hardware device
1.五金件开孔->打固定螺丝孔、攻丝
1. hardware openings > fixing screw holes, tapping.
2.五金装置->调试
2. hardware installation > debugging
3.五金装置框扇->调整框、扇空隙->五金调整
3. hardware frame fan > adjustment box, fan gap > hardware adjustment.
六、密封胶外表精整，密封门扇胶外表，准确调整完结
Six, sealant appearance finishing, sealing door rubber appearance, accurate adjustment finished.
七、质量检测，由质检人员对门扇、五金配件遍地进行严厉检测，并签署质量合格检测表单
7. Quality inspection shall be carried out by quality inspectors throughout the country to strictly inspect door fans and hardware fittings, and to sign quality inspection forms.
八、检验入库，通知甲方人员到厂检验，检验合格后即入库
Eight, check the warehousing, notify party a personnel to go to the factory for inspection, after inspection, that is, warehousing.
九、包装运送，由我方进行包装并负责产品运送
Nine. Packing and transporting, we shall carry out safety packing and take delivery of products.
十、现场装置、保洁，产品运送装置现场，由装置师傅装置调试完结，并进行较终的清洁作业，较终甲方签字检验。
10. On-site equipment, cleaning, product delivery to the installation site, by the professional installation master device debugging, and the final cleaning operation, the final signature inspection.
- 上一篇：铜门呈现铜锈铜斑应该如何处置
- 下一篇：铜门的运用比一般门更耐用的原因？
